Suburban Aquaponics Moving Outdoor Plants Indoors

Check out this video to see how we are getting a longer growing season out of some of our summer plants. The cold weather came early this year up in Michigan and we had a few plants that we didnt get to see much production from. Our Bell peppers plants just didnt grow very well this year and ended up getting over crowded in our square foot gardens. Since we have the aquaponics system going year round it makes it easy to grab anything from the garden at the end of the season that we want to keep going and plant it inside. I have had pretty good luck so far growing indoors with this system and it is so easy to transplant into and out of the aquaponics!


I have had the best luck transplanting plants into the system but no the best of luck transplanting out if it. Once most plants get used to the lazy lifestyle of the easy aquaponics growing they dont like to get back into a regular dirt situation. While growing in the system they have easy access to water and nutrients and dont develop very deep thick roots like they would in dirt. So when you move most plants out of the system into a normal garden they have a lower survival rate. I have been able to move out some apple tress that were in the system for awhile but trees develop much differently than most other plants.


Clip from MHP gardener - http://youtu.be/9W11fWbsShM

 

 

 

 

Read More..

14 Moving the System in a Minivan

System packed into a Minivan
The system you’ve been reading about will be auctioned off at the September 2011 Aquaponics Association Conference this weekend on Saturday, the evening of 17 September.

My problem? How to get this sucker from Northern Virginia to Orlando, Florida.

Someone else’s problem? How to get this sucker for Orlando, Florida, to their place.

I figured the bidding pool would shrink significantly if the system was too big to fit in a standard vehicle. So here we go, packing the bits up and loading them into the back of my minivan. I left both seats in the van, since there’s no guarantee someone wanting to take this home will have thought to remove seats from their van.

It can work. You can take the 365 Aquaponics System with you – an investment you wouldn’t have to leave behind if life turned upside down. You’d have to leave the most the water behind, as well as the fish. You might even want to gift all but one grow bed worth of media to a friend. But at the end of the day, you could pick up and take it with you.

I look forward to seeing many of you in Orlando, at the Aquaponics Conference. But the anticipation can’t be better than the friendships and memories I’ll have to look back on when it’s all done.

Heres some more pictures:

The interior of my minivan with some of the long bits inside

Packing the growbeds inside

Side view through the sliding door

Read More..

Preparing for Winter

Daffodils - Plant in Fall for a Spring Treat

Today I wandered by the hardware store and bought various things for upcoming projects. The daffodils were a splurge, but something I knew my daughter would enjoy.

Ive got two projects in the works - the greenhouse-style shed, so I can show you how to finish off the greenhouse at the ends, and a solar heater, to keep things toasty in the greenhouse as it gets cold outside.

I posted the Cansolair video yesterday, but Im doing a DIY version, our of pop cans. A particularly good set of instructions can be found online at http://solar.freeonplate.com/solar_panel_DIY.htm. Though Im still at the beginning of the process, Ive figured out a couple of improvements.

• Use an empty soup can to brace the aluminum cans as you start cutting. The closer it is in size to the aluminum cans, the better. The point is that your aluminum can will not buckle (twist, tear, shred, undergo other plastic deformation) as you work, because the soup can will stabilize the perimeter. This is good.
• Having a massive nail/spike and tin snips is nice, but all you really need is a 1-1/4 inch spade drill bit. I put the bit in my power drill, not because I want to use the power tool, but because the tool gives me leverage and control. The idea is to push the bit into the ends of the soda can - it slices through like a hot knife through cold butter.

Some argue that you dont actually have to punch holes in the cans, but wanted to post these tips for those who want to do the "classic" soda can solar heater construction technique.

Read More..