Watch this video to see our solar pool heater design and learn some tips and tricks when building your own. We are in the second season of using this solar pool heater to heat our pool and have been very happy with the results thus far. The heater is made of 2 x 4 construction and 3/4" particle board for the box. The tubing is 500 feet of 1/2" irrigation tubing which was purchased for less than $20. Once I get the tubing back into place I plan to cover the entire box with a piece of glass, plastic, or some other transparent material that can hold some additional heat in around the tubing.
The diverter that I made diverts some of the flow of pool water from the pool pump for both my solar heater and the wood burning heater.
I let this run continuously through the solar heater when it is sunny. I will post a separate video on the exact temperatures once I get some figures put together but the heater helps keep the pool temperature around 80 degrees with less than 8 hours of sunlight on the solar heater or pool. I also use a wood burning pool heater if we have a few days of rain or clouds to boost the temp back up. Click here if youd like to read more about wood burner.
The overall cost of this project with the irrigation tubing, fittings, PVC pipe for diverter, valves, and wood for the stand was about $80. I also used some stain that I already had to seal up the untreated wood a little bit as well. Compared to the cost of the solar heaters that you can purchase this project is a fraction of the cost with more surface area of tubing that can capture more heat energy.
This post has been shared at: Homestead Barn Hop
0 comments:
Post a Comment